FlexComp National Hose

FlexComp Hydrocarbon Hoses

FLEXOIL GGP 250

FlexOIL GGP is a thermoplastic hose manufactured from polypropylene, polyethylene, and polyester films and fabrics tensioned between internal wire and external wires. FlexOIL GGP is specifically designed for conveying a wide range of hydrocarbons and solvents. Combined with our uniquely designed dry seal system, FlexOIL GGP offers a safe and reliable transfer solution.

Typical Conveyants: Fuel and heavy oils, diesel, lubricants, kerosene, and various solvents.

Typical Applications: Tank trucks, rail car, ship-to-shore, bunkering, and marine operations.

CONSTRUCTION:

Cover: Black with white stripe, Vinyl coated polyester. Abrasion, ozone, flame and UV resistant

Internal Wire: G – Galvanized Steel

External Wire: G – Galvanized Steel
*Other wire combinations available upon request

Internal Lining: Polypropylene

Reinforcing layers: Combination of polypropylene, polyethylene film wraps, seamless tubes, & high-density fabrics

Options: Custom colours and branding

PHYSICAL PROPERTIES:

Temperature range: -40°C to + 100°C

Working pressure: 250 PSI

Pressure safety ratio: 4:1

Electrically continuous

Complies with US Coast Guard, IMO IBC, NAHAD guidelines

FlexComp hoses in use

Technical Data: FLEXOIL GGP 250

Inside Dia.
Inches

1

1.5

2

2.5

3

4

6

Working Pressure (PSI)

250

250

250

250

250

250

250

Vacuum

Full

Full

Full

Full

Full

Full

Full

MBR
Inches

3.5

5.0

6.5

7.5

10.5

13.5

24.0

Approx Weight lbs/ft

0.9

1.2

1.7

2

2.6

4.7

5.8

Maximum Length (ft)

60

60

60

60

60

50

50

* 8 inch, 10 inch, 12 inch and custom size data available upon request

END FITTINGS: NPT, Flanged, Quick disconnects, TTMA, Victaulic and Custom available in a variety of materials

ADDITIONAL INFORMATION:

Rated Working Pressure @ ambient temperature

Never exceed stated working pressures or operate outside temperature range.

Refer to chemical compatibility chart for specific recommendations

Technical data is approximate and subject to change.

FLEXOIL GGP 150

FlexOIL GGP is a thermoplastic hose manufactured from polypropylene, polyethylene, and polyester films and fabrics tensioned between internal and external wires. FlexOIL GGP is designed for conveying a variety of petroleum products. Fitted with our uniquely designed dry seal system, this hose offers a safe and reliable transfer solution.

Typical Conveyants: Light distillates, gasoline, diesel, paraffin, water, light slurry.

Typical Applications: Road tanker, in-plant, rail car, tank storage, and dockside operations, dewatering, pumping

CONSTRUCTION:

Cover: Black with white stripe, PVC coated polyester. Abrasion, ozone, flame and UV resistant

Internal Wire: G – Galvanized Steel

*Other wire combinations available upon request

Internal Lining: Polypropylene

Reinforcing layers: Combination of polypropylene, polyethylene film wraps, seamless tubes, and high-density fabrics

Options: Custom colours and branding

PHYSICAL PROPERTIES:

Temperature range: -40°C to + 100°C

Working pressure: 150 PSI

Pressure safety ratio: 4:1

Electrically continuous

Complies with US Coast Guard, IMO IBC, NAHAD guidelines

Technical Data: FLEXOIL GGP 150

Inside Dia.
Inches

1.5

2

2.5

3

4

6

Working Pressure (PSI)

150

150

150

150

150

150

Vacuum

Full

Full

Full

Full

Full

Full

MBRInches

5.0

6.5

7.5

10.5

13.5

24.0

Approx Weight lbs/ft

0.83

1.12

1.15

1.19

3.7

5.5

Maximum Length (ft)

60

60

60

60

50

50

* 8 inch, 10 inch, 12 inch and custom size data available upon request

END FITTINGS: NPT, Flanged, Quick disconnects, TTMA, Victaulic and Custom available in a variety of materials

ADDITIONAL INFORMATION:

Rated Working Pressure @ ambient temperature

Never exceed stated working pressures or temperatures

Refer to chemical compatibility chart for specific recommendations

Technical data is approximate and subject to change

FLEXOIL AAP 150

FlexOIL AAP is an extremely lightweight thermoplastic hose option for medium pressure transfer of hydrocarbon based products including 100% aromatic content. Combined with our uniquely designed dry seal system, FlexOIL APP 150 offers a leak free safe solution.

Typical Conveyants: Light distillates, gasoline, diesel, bio-diesel, kerosene, paraffin, and aviation fuels.

Typical Applications: Road tanker, in-plant, rail car, and storage, dewatering, pumping, construction

CONSTRUCTION:

Cover: Black / White stripe, PVC coated polyester. Abrasion, ozone, flame and UV resistant

Internal Wire: A – Aluminum

External Wire: A – Aluminum coated galvanized
*Other wire combinations available upon request

Internal Lining: Polypropylene

Reinforcing layers: Combination of polypropylene, polyethylene films, high-density fabrics and barriers

Options: Custom colours and branding

PHYSICAL PROPERTIES:

Temperature range: -40°C to + 80°C

Working pressure: 150 PSI

Pressure safety ratio: 4:1

Electrically continuous

Technical Data: FLEXOIL AAP 150

Inside Dia.
Inches

1.5

2

2.5

3

4

Working Pressure (PSI)

150

150

150

150

150

Vacuum

Full

Full

Full

Full

Full

MBR
Inches

3.91

5.91

7.88

9.85

11.81

Approx Weight lbs/ft

0.57

0.79

0.95

1.18

1.7

Maximum Length (ft)

60

60

60

60

50

END FITTINGS: NPT, Flanged, Quick disconnects, TTMA, Victaulic, Custom available in a variety of materials

ADDITIONAL INFORMATION:

Rated Working Pressure @ ambient temperature

Never exceed stated working pressures or operate outside temperature range.

Refer to chemical compatibility chart for specific recommendations

Technical data is approximate and subject to change.

FLEXOIL AAP 70

FlexOIL AAP 70 is an ultra lightweight thermoplastic hose ideal for low-pressure transfer of petroleum based products combined with our uniquely designed dry seal system, this hose offers a safe and reliable transfer solution.

Typical Conveyants: light distillates, gasoline, diesel, paraffin.

Typical Applications: Road tanker, in-plant, rail car, dewatering

CONSTRUCTION:

Cover: Black / White stripe, PVC coated polyester. Abrasion, ozone, flame and UV resistant

Internal Wire: A – Aluminum

External Wire: A – Aluminum
*Other wire combinations available upon request

Internal Lining: Polypropylene

Reinforcing layers: Combination of polypropylene, polyethylene films, high-density fabrics and barriers

Options: Custom colours and branding

PHYSICAL PROPERTIES:

Temperature range: -40°C to + 80°C

Working pressure: 70 PSI

Pressure safety ratio: 4:1

Electrically continuous

Technical Data: FLEXOIL AAP LIGHT 70

Inside Dia.
Inches

1.5

2

2.5

3

4

Working Pressure (PSI)

150

150

150

150

150

Vacuum

Full

Full

Full

Full

Full

MBR
Inches

3.9

5.9

7.9

9.9

11.8

Approx Weight lbs/ft

0.26

0.6

0.75

0.97

1.21

Maximum Length (ft)

60

60

60

60

50

END FITTINGS: NPT, Flanged, Quick disconnects, TTMA, Victaulic and Custom available in a variety of materials

ADDITIONAL INFORMATION:

Rated Working Pressure @ ambient temperature

Never exceed stated working pressures or temperatures

Refer to chemical compatibility chart for specific recommendations

Technical data is approximate and subject to change

FLEXOIL HT GGP 250

FlexOIL HT GGT is a thermoplastic hose designed around non-porous fluoropolymer films, seamless tubes and reinforced with high-density fabrics designed for high temperature applications. Covered with a special high temperature polyurethane coated fabric provides superior abrasion resistance. Combined with our uniquely designed dry seal system equals a safe, reliable, gas-tight solution.

Typical Conveyants: Hot oils, asphalt, hot chemicals, and high aromatics

Typical Applications: Road tanker, in-plant, rail car, tank storage, and dockside operations

CONSTRUCTION:

Cover: Black / Red stripe, Special PU coated farbic. Abrasion, ozone, flame and UV resistant

Internal Wire: G – Galvanized

External Wire: G – Galvanized
*Other wire combinations available upon request

Internal Lining: Non-Porous Fluoropolymer films and seamless tubes

Reinforcing layers: Fluoropolymer films & seamless tubes, high-density, high temperature fabrics and barriers

Options: Custom colours and branding

PHYSICAL PROPERTIES:

Temperature range: -40°C to + 175°C (250°C available)

Working pressure: 250 PSI

Pressure safety ratio: 4:1

Electrically continuous

Complies with US Coast Guard, IMO IBC, and NAHAD Guidelines

Technical Data: FLEXOIL HT GGT 250

Inside Dia.
Inches

1

1.5

2

2.5

3

4

Working Pressure (PSI)

250

250

250

250

250

250

Vacuum

Full

Full

Full

Full

Full

Full

MBR
Inches

3.94

5.51

7.09

8.66

11.02

15.75

Approx Weight lbs/ft

0.9

1.2

1.7

2

2.6

4.7

Maximum Length (ft)

60

60

60

60

60

50

* Additional sizes including large bore available upon request

END FITTINGS: NPT, Flanged, Quick disconnects, TTMA, Victaulic, Custom available in a variety of materials

ADDITIONAL INFORMATION:

Rated Working Pressure @ ambient temperature

Never exceed stated working pressures or temperatures

Refer to chemical compatibility chart for specific recommendations

Technical data is approximate and subject to change

FLEXOIL BLH GGP 250

FlexBLH Oil GGP is a thermoplastic hose designed for the transfer of hydrocarbon and solvent based products. Other conveyants include a variety of acids and solvents (BLH CHEM), and aggressive chemicals (BLH PTFE). Our uniquely designed dry seal system offers a safe and reliable bottom loading solution.

Typical Conveyants: Light distillates, gasoline, diesel, solven, kerosene, and other petroleum products

Typical Applications: Loading arms and hose towers

CONSTRUCTION:

Cover: Black / Yellow stripe, PVC coated polyester. Abrasion, ozone, flame and UV resistant

Internal Wire: G – Galvanized Steel

External Wire: G – Galvanized Steel
*Other wire combinations available upon request

Internal Lining: Polypropylene

Reinforcing layers: Polypropylene, polyethylene films, seamless tubes, high-density, low elongation & flame resistant fabrics

Options: Custom colours and branding

PHYSICAL PROPERTIES:

Temperature range: -40°C to + 100°C

Working pressure: 250 PSI

Pressure safety ratio: 4:1

Electrically continuous

Complies with US Coast Guard Requirements & NAHAD Guidelines

Technical Data: FLEXOIL GGP 250

Inside Dia.
Inches

1

1.5

2

2.5

3

4

6

Working Pressure (PSI)

250

250

250

250

250

250

250

Vacuum

Full

Full

Full

Full

Full

Full

Full

MBR
Inches

3.5

5.0

6.5

7.5

10.5

13.5

24.0

Approx Weight lbs/ft

0.9

1.2

1.7

2

2.6

4.7

5.8

Maximum Length (ft)

60

60

60

60

60

50

50

* 8 inch, 10 inch, and 12 inch data available upon request

END FITTINGS: NPT, Flanged, Quick disconnects, TTMA, Victaulic, Custom available in a variety of materials

ADDITIONAL INFORMATION:

Rated Working Pressure @ ambient temperature

Never exceed stated working pressures or operate outside temperature range.

Refer to chemical compatibility chart for specific recommendations

Technical data is approximate and subject to change.

FLEXVAPOR GGP 150

FlexVapor GGP is a multi layered thermoplastic hose designed for petrochemical vapour recovery systems in ship-to-shore, bottom loading, tank truck, loading and unloading applications. Combined with our uniquely designed dry seal systemFlexVapor GGP offers a safe and reliable solution for recovering volatile hydrocarbon and chemical vapours.

Typical Conveyants: Petrochemical and 100% aromatic vapors

Typical Applications: Vapor recovery for loading & loading, refi nery, distribution terminals, and dockside operations

CONSTRUCTION:

Cover: Yellow / White stripe, PVC coated polyester. Abrasion, ozone, flame and UV resistant
* Red banding available upon request

Internal Wire: G – Galvanized

External Wire: G – Galvanized
*Other wire combinations available upon request

Internal Lining: Polypropylene

Reinforcing layers: Combination of polypropylene, polyethylene & nylon films, seamless tubes & high density fabrics

Options: Custom colours, branding and chemical version available

PHYSICAL PROPERTIES:

Temperature range: -40°C to + 100°C

Working pressure: 150 PSI (70 PSI &100 PSI available)

Pressure safety ratio: 4:1

Electrically continuous

Complies with USCG 33CFR Part 154.810 & NAHAD Guidelines

Technical Data: FLEXVAPOR GGP 150

Inside Dia.
Inches

1.5

2

2.5

3

4

6

Working Pressure (PSI)

150

150

150

150

150

150

Vacuum

Full

Full

Full

Full

Full

Full

MBR
Inches

5.0

6.5

7.5

8.0

12.0

22.0

Approx Weight lbs/ft

0.83

1.12

1.15

1.9

3.7

5.5

Maximum Length (ft)

60

60

60

60

50

50

* 8 inch, 10 inch, and 12 inch data available upon request

END FITTINGS: NPT, Flanged, Quick disconnects, TTMA, Victaulic, Custom, available in a variety of materials

ADDITIONAL INFORMATION:

Rated Working Pressure @ ambient temperature

Never exceed stated working pressures or temperatures

Refer to chemical compatibility chart for specific recommendations

Technical data is approximate and subject to change

FLEXBIO SGX 150

FlexBIO SGX is a thermoplastic hose manufactured from multiple layers of polypropylene, polyethylene, and polyester films, including a UHMWPE seamless tube, reinforced with high-density fabrics. Special films ensure 100% resistance to aromatics. Combined with our uniquely designed dry seal system, FlexBIO offers the safest transfer solution.

Typical Conveyants: Petroleum, bio-fuels, bioethanol (up to E98), Biodiesel (up to D100), MTBE, Benzene, and alternative fuels

Typical Applications: In-plant, tank truck, loading and unloading terminals, ship-to-shore

CONSTRUCTION:

Cover: Green / White stripe, PVC coated polyester. Abrasion, ozone, flame and UV resistant

Internal Wire: S – Stainless Steel

External Wire: G – Galvanized
*Other wire combinations available upon request

Internal Lining: Special Films

Reinforcing layers: Combination of polypropylene, polyethylene, special seamless tubes, and high-density fabrics

Options: Custom colours and branding

PHYSICAL PROPERTIES:

Temperature range: -40°C to + 100°C

Working pressure: 150 PSI

Pressure safety ratio: 4:1

Electrically continuous

Complies with USCG and NAHAD Guidelines

Technical Data: FLEXBIO SGX 150

Inside Dia.
Inches

1

1.5

2

2.5

3

4

6

Working Pressure (PSI)

150

150

150

150

150

150

150

Vacuum

Full

Full

Full

Full

Full

Full

Full

MBR
Inches

3.94

5.5

7.1

8.7

11.0

15.8

22.6

Approx Weight lbs/ft

0.65

1.01

1.47

2.08

2.46

3.55

8.0

Maximum Length (ft)

60

60

60

60

60

50

50

* 8 inch, 10 inch, and larger sizes available upon request

END FITTINGS: NPT, Flanged, Quick disconnects, TTMA, Victaulic, Custom available in a variety of materials

ADDITIONAL INFORMATION:

Rated Working Pressure @ ambient temperature

Never exceed stated working pressures or temperatures

Refer to chemical compatibility chart for specific recommendations

Technical data is approximate and subject to change